Skip to content

Costs & buying

How to Test Water Hardness at Home (and Read the Number)

By Jordan Park, owner Updated 6 min read

Quick answer

A hardness test strip or a drop-count titration kit from a hardware store gives you a reading in grains per gallon or ppm in under a minute. A strip places you in a band; a drop kit gives a number. A lab test is the only way to get a precise figure plus everything else in the water.

Key points

  • Test strips are accurate to a band (soft, moderate, hard, very hard). Drop-count kits give a number: each drop is one grain per gallon.
  • A TDS meter does not measure hardness. It reads all dissolved solids, including sodium and chloride that have nothing to do with scale.
  • 1 grain per gallon = 17.1 ppm (mg/L as calcium carbonate). Boise's 2025 report lists 13–219 ppm, so your tap could be anywhere from under 1 to nearly 13 grains.
  • By the USGS scale, 0–60 ppm is soft, 61–120 moderately hard, 121–180 hard, and over 180 very hard.
  • After a softener is installed, the same strip should read near 0–1 grain. That is the easiest way to confirm it works.

Four ways to test hardness, from cheapest to most precise

Method Cost What you get Best for
Utility report Free The system-wide range Knowing the ballpark before you test
Test strip A few dollars A band (soft to very hard) A quick answer
Drop-count titration kit Under $20 A number in grains per gallon Sizing a softener, checking one works
Lab test Varies by lab A precise number plus other contaminants Private wells, disputes, anything beyond hardness

Each is covered below. None of them is a TDS meter, for reasons explained further down.

Start with the utility report

If you are on city water, the annual water quality report gives the range for the whole system. Veolia Water Idaho’s 2025 report lists Boise hardness from 13 to 219 ppm with a system average of 105 ppm. That is a wide spread, from soft to very hard, because the system blends 81 wells with treated river water in different proportions by neighborhood. The report tells you what is possible at your address; a test tells you what is actual. For the neighborhood picture, see how hard Boise water is.

How to use a hardness test strip

Strips are sold at hardware stores, pet stores (aquarium hardness strips work the same way) and online. Dip the strip in a glass of cold tap water for a second or two, hold it level, wait the time printed on the bottle, and match the pad’s color to the chart.

The chart usually has five or six blocks covering 0 to about 25 grains per gallon. That is the limitation: a strip tells you which block you are in, not where inside it. A result that looks like “about 7 grains” could be 5 or 9. For a yes-or-no answer about whether your water is hard, that is enough. For sizing equipment it is not.

Two tips. Run the tap for 30 seconds first so you sample water from the main rather than water that sat in the pipe. Test cold water from a tap upstream of any softener, filter or refrigerator dispenser.

How to use a drop-count titration kit

A titration kit is a small bottle of reagent and a measuring tube. Fill the tube to the line, add reagent one drop at a time, swirl, and count the drops until the sample turns from red to blue. On most kits, each drop equals one grain per gallon. Twelve drops means twelve grains. Some kits scale differently, so read the label.

This is the method most installers carry, and it is precise enough to size a softener or to check that an installed one is doing its job. After a softener is installed, the same kit on a softened tap should turn blue on the first drop, a reading of about 0–1 grain. If it takes five drops, something is wrong with the settings, the salt, or the bypass valve.

Why a TDS meter will not tell you hardness

This is the most common mistake. A TDS (total dissolved solids) meter is a pen-shaped device that measures electrical conductivity and converts it to parts per million of everything dissolved in the water: calcium and magnesium, but also sodium, chloride, sulfate, bicarbonate and more.

Hardness is only calcium and magnesium. Two taps with the same TDS can have very different hardness, and a softened tap often reads higher on a TDS meter than it did before the softener, because the softener swapped calcium for sodium ion-for-ion. A TDS meter is useful for checking a reverse osmosis system (a working RO membrane cuts TDS sharply, so a reading close to the untreated tap means the membrane is spent), and useless for a hardness decision.

Converting between ppm and grains per gallon

Utility reports use ppm (mg/L as calcium carbonate). Softener sizing, strips and most sales conversations use grains per gallon (gpg). The conversion, per the USGS, is 1 gpg = 17.1 ppm.

ppm (mg/L) Grains per gallon USGS band
13 (Boise low end, 2025) 0.8 Soft
60 3.5 Soft / moderately hard boundary
105 (Boise average, 2025) 6.1 Moderately hard
120 7.0 Moderately hard / hard boundary
180 10.5 Hard / very hard boundary
219 (Boise high end, 2025) 12.8 Very hard

To convert any reading: ppm divided by 17.1 gives grains; grains times 17.1 gives ppm.

What your result means

The USGS bands, as calcium carbonate:

  • Soft, 0–60 ppm (0–3.5 gpg). No treatment needed for scale. Soap lathers easily.
  • Moderately hard, 61–120 ppm (3.6–7 gpg). Light spotting on glassware and shower doors, some scale on faucets. Many homes live with it. A softener here is a comfort choice.
  • Hard, 121–180 ppm (7.1–10.5 gpg). Steady scale on fixtures and inside the water heater, dull laundry, dry-skin complaints. A common rule of thumb in the trade puts the worth-treating line at about 7 grains.
  • Very hard, over 180 ppm (over 10.5 gpg). Heavy scale, shortened appliance life, clogged aerators and showerheads. A softener protects plumbing and appliances rather than just comfort.

Boise’s 2025 range runs from the first band to the last, which is why the city average tells you less than your own strip.

Using the number to size a softener

The sizing formula used across the industry multiplies three things: hardness in grains, people in the household, and a daily water-use figure per person, commonly around 75 gallons. The result is grains of hardness per day; the softener’s capacity in grains divided by that figure is how many days it runs between regenerations.

Two adjustments installers make:

  • Iron. Dissolved iron loads a softener’s resin much faster than hardness does. A common installer rule is to add about 3 to 5 grains of hardness to the calculation for every 1 ppm of iron. On a Treasure Valley well with iron, this can double the effective hardness. A lab test is the only reliable way to know the iron figure.
  • Regeneration type. Softeners that regenerate on demand (metered) rather than on a fixed timer use less salt and water, as EPA’s WaterSense water softener technical sheet notes. Sizing still matters, but a metered valve forgives a rough estimate better than a timer does.

If the number comes back low enough that you are wondering whether a salt-free unit would do, read do salt-free water softeners work in Boise first. They do not remove hardness, so a strip will read the same before and after.

When to skip the strip and go to a lab

A strip or drop kit answers the hardness question. It does not answer anything else. Go to a lab if:

  • You are on a private well. Hardness is the least of what you need to know; arsenic, nitrate, uranium and bacteria matter more and only a lab finds them.
  • You are sizing equipment for a well with iron, manganese or sulfur smell.
  • You want a documented number, for a home sale, a landlord, or a warranty claim.

In the Treasure Valley, Analytical Laboratories in Boise runs hardness as a routine test, and Central District Health handles sampling for Ada County residents. The water testing guide lists them along with the other Idaho labs and health districts, what each tests for, and current fees.

Frequently asked questions

Can I use a TDS meter to check water hardness?
No. A TDS meter measures total dissolved solids by electrical conductivity, which includes sodium, chloride, sulfate and everything else dissolved in the water. Two taps with the same TDS can have very different hardness. Softened water often reads higher on a TDS meter than before, because sodium replaced the calcium. Use a hardness strip or titration kit instead.
How accurate are water hardness test strips?
Accurate enough to place you in a USGS band, not accurate enough for a precise number. Most strips use five or six color blocks spanning 0 to about 25 grains, so a reading of 'about 7' could really be 5 or 9. For sizing a softener or settling a dispute, use a drop-count kit or a lab.
Should I test hot water or cold water?
Cold, from a tap before any treatment device. Hardness does not change between the hot and cold lines unless a softener or filter is plumbed to only one of them. Run the tap for 30 seconds first so you are sampling water from the main, not water that sat in the pipe.
What hardness reading means I need a softener?
A common rule of thumb in the trade is that scale becomes worth treating at about 7 grains (120 ppm). Below that, a softener is a comfort choice. Above about 10 grains, scale shortens water heater and appliance life. Boise's 2025 report spans 13–219 ppm, so some neighborhoods need nothing and others sit well past the threshold. See how hard Boise water is.
How do I get a precise hardness number in the Treasure Valley?
Send a sample to a lab. Analytical Laboratories in Boise runs hardness as a standard test, and Central District Health handles sampling for Ada County residents. Our water testing guide lists Idaho labs and health districts with what each one offers.

Sources

  1. USGS, water hardness classification and conversion
  2. Veolia Water Idaho 2025 Consumer Confidence Report (hardness range)
  3. EPA WaterSense, water softeners technical sheet (demand-initiated regeneration)

This guide is general information about Treasure Valley water and treatment options. It does not replace your utility's annual report or a lab test of your own tap. First published November 1, 2026.

Want to know what your own tap needs?

Tell us what you’re noticing at home.