Skip to content

Water softeners

Water Softener vs Reverse Osmosis in Boise: Which Do You Need?

By Jordan Park, owner Updated 5 min read

Quick answer

A water softener removes hardness from every tap in the house to stop scale and spotting; reverse osmosis removes dissolved contaminants from the water you drink at one tap. In Boise, spots and scale point to a softener, concern about arsenic, uranium or nitrate points to RO, and many homes end up with both.

Key points

  • They solve different problems. A softener is a whole-house hardness fix; RO is a drinking-water fix at the kitchen sink.
  • Boise hardness ranges from 13 to 219 ppm by neighborhood (Veolia, 2025), so some homes need no softener at all.
  • Boise's 2025 report shows arsenic at 86% of its limit and uranium at 72%. That is the case for RO, not for a softener.
  • Neither device fixes chlorine taste on its own; that is a carbon filter's job, usually built into both systems.
  • On a private well, test before buying anything. The fix depends on what the lab finds.

They are not competing products

People compare softeners and reverse osmosis as if choosing between them, but they do different work on different water.

A water softener sits where the water enters the house. It passes every gallon through a resin bed that swaps calcium and magnesium (hardness) for sodium. The result is no scale in the water heater, no white crust on faucets, no spots on glasses, and soap that lathers. It does not remove arsenic, nitrate, uranium, chlorine or disinfection byproducts. Nothing about a softener makes water safer to drink; it makes it easier to live with.

A reverse osmosis system sits under the kitchen sink and treats only the water from one dedicated faucet (and often the fridge line). It forces water through a membrane that rejects most dissolved substances, including the ones a softener ignores: arsenic, uranium, nitrate, chromium-6, PFAS, fluoride, sodium and hardness itself. It produces a few gallons a day, slowly. It does nothing for the shower.

So the question is not “which is better.” It is “which problem do I have?”

Match the device to the symptom

What you notice Likely cause What fixes it
White crust on faucets, spots on dishes, film on shower doors Hardness Whole-home water softener
Soap and shampoo do not lather; dry skin and hair Hardness Water softener
Water heater noisy or failing early Scale from hardness Water softener
Chlorine taste or pool smell Disinfectant residual Carbon filter (whole-home or in the RO prefilter)
Concern about arsenic, uranium, nitrate in the report Dissolved contaminants Under-sink reverse osmosis
Flat or metallic taste in drinking water Dissolved solids, iron RO, or iron treatment on wells
Orange or black staining, rotten-egg smell Iron, manganese, sulfur (usually wells) Lab test first, then well treatment
Nothing, but you want a margin on what you drink Preference Reverse osmosis

Carbon filtration appears twice because neither headline product handles chlorine by itself. Most softener installs include a carbon stage, and every RO system has a carbon prefilter. If chlorine is your only complaint, see why Boise water tastes like chlorine before buying either.

Do you need a softener? Check your neighborhood’s hardness

Boise’s hardness is not one number. Veolia’s 2025 report lists a range of 13 to 219 ppm with a system average of 105 ppm, because each neighborhood gets a different blend of the utility’s 81 wells and treated Boise River water. On the USGS scale, 0–60 ppm is soft, 61–120 moderately hard, 121–180 hard and above 180 very hard.

That means a home near the bottom of the range has soft water and gains little from a softener, while a home near the top has very hard water and will see every symptom in the table. A test strip or a lab hardness test tells you where you sit; how hard is Boise water explains how to read the result. Homes on private wells in the valley often test harder than city water.

Do you need RO? Read the drinking-water numbers

The case for reverse osmosis in Boise is not safety in the legal sense. The 2025 report shows no violations. It is margin. Three regulated contaminants run closer to their limits than in most Treasure Valley systems:

  • Arsenic: 8.6 ppb compliance result against a 10 ppb limit (range ND–14.5)
  • Uranium: 21.5 µg/L against a 30 µg/L limit (range ND–33)
  • Nitrate: 5.9 ppm against a 10 ppm limit (range ND–6.5)

Add the valley’s highest disinfection byproducts (TTHMs at 45.1 ppb against 80; HAA5 at 38.5 against 60) and you have the list of things a softener cannot touch and an RO membrane plus carbon prefilter can. EPA has described under-sink RO units as a way for small water systems to meet standards for contaminants such as arsenic and radium (2006). The full case is in is reverse osmosis worth it in Boise.

If those numbers do not bother you, that is a reasonable reading of the report, and RO is optional.

Why so many Boise homes end up with both

The two systems cover each other’s gaps:

  1. Different water. The softener handles the 99% of household water that goes to showers, laundry and appliances. The RO handles the gallon or two a day you drink and cook with.
  2. The softener protects the RO. Hardness scales an RO membrane the same way it scales a water heater. Manufacturers generally recommend softened feed water, which lengthens the time between membrane replacements.
  3. The RO removes the softener’s sodium. Softening adds a small amount of sodium in exchange for the hardness it removes. At the kitchen tap the RO strips it back out, so drinking water ends up with less sodium than the raw tap, not more.
  4. Carbon covers taste. The whole-home carbon stage removes chlorine for showers and the RO prefilter removes it for drinking water.

A combined softener, carbon and RO setup is what most installers in the valley, including ours, sell as a complete system. That does not mean every home needs the whole thing. A soft-water neighborhood with no taste complaints might reasonably add only RO; a very hard neighborhood that is content with the drinking-water numbers might add only a softener.

What each costs, in national terms

Local companies quote per home rather than publishing prices, so national references are the fair comparison. HomeGuide puts an under-sink RO at $300–$950 installed with $20–$100 filter changes every 6 to 12 months. Whole-home softeners cost more, with the installed price driven by capacity, whether carbon is included and the plumbing run; the ranges and what drives them are on water softener cost in Boise. Ongoing softener cost is mostly salt.

On a private well, test first

Everything above assumes city water with a published report. A well has no report. Iron, manganese, sulfur, bacteria, nitrate and hardness all vary by depth and location across Ada and Canyon counties, and the right equipment depends entirely on the lab result. A softener installed on an iron-heavy well without pretreatment fouls quickly; an RO on bacterially unsafe water is the wrong tool. Start with how to test your water, then design.

A short decision rule

  • Spots, scale, soap scum, dry skin: softener.
  • Chlorine taste only: carbon filter.
  • Want drinking water near zero for arsenic, uranium, nitrate: reverse osmosis.
  • Both sets of symptoms, or hard neighborhood plus margin preference: both, softener first.
  • Private well: lab test, then decide.

If you are not sure which bucket you are in, the utility report and a hardness strip settle most of it in ten minutes.

Frequently asked questions

Can a water softener remove arsenic, nitrate or uranium?
No. A softener exchanges calcium and magnesium for sodium. It does not meaningfully reduce arsenic, nitrate, uranium or disinfection byproducts. Those are reverse osmosis jobs. See is reverse osmosis worth it in Boise.
Can reverse osmosis replace a water softener?
Only at one tap. An under-sink RO removes hardness from the water it treats, but it produces a few gallons a day and treats cold water at a single faucet. It does nothing for your water heater, shower, dishwasher or washing machine.
Do I need both a softener and RO in Boise?
It depends on your neighborhood's hardness and how you feel about the drinking-water numbers in the 2025 report. A home at 200 ppm hardness that also wants arsenic and uranium near zero benefits from both. A home at 40 ppm with no taste complaints may need neither.
Does softened water have too much sodium to drink?
Softening adds a small amount of sodium in exchange for the hardness it removes. For most people it is minor compared with food, but anyone on a sodium-restricted diet should ask their doctor. An RO system at the kitchen tap removes the sodium again, which is one reason the two are often paired.
Which should I buy first?
Match the device to the symptom. Scale, spots and soap scum: softener first. Taste, smell or contaminant concern: RO (or a carbon filter) first. If you plan to add both eventually, installing the softener first protects the RO membrane from scaling.

Sources

  1. Veolia Water Idaho 2025 Consumer Confidence Report
  2. USGS, Hardness of Water
  3. EPA, point-of-use treatment options for small drinking water systems (2006 announcement)
  4. HomeGuide, reverse osmosis system cost

This guide is general information about Treasure Valley water and treatment options. It does not replace your utility's annual report or a lab test of your own tap. First published November 1, 2026.

Want to know what your own tap needs?

Tell us what you’re noticing at home.